-40%
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA
Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA

Wrecker Insert Generic Model 1/10 scale 3d printed RC prop Kit USA

$ 23.76

Availability: 100 in stock
  • Compatible Fuel Type: All
  • Compatible Scale: 1:10
  • Type: Prop
  • Country/Region of Manufacture: United States
  • MPN: Does Not Apply
  • Return shipping will be paid by: Seller
  • Custom Bundle: No
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Compatible Brand: All
  • Restocking Fee: No
  • Color: Black
  • Model: 10sWreckerInsert Kit
  • Condition: New
  • Brand: Hobbyburger
  • Refund will be given as: Money Back

    Description

    For Sale - 3d printed 1/10 scale
    Wrecker Insert Kit
    Important: Read all material and study pictures before purchase.
    This item is for a skilled custom RC model builder.
    This item is roughly 1/10 scale 3d printed model of a wrecker crane mechanism that sits in the bed of an RC model truck.
    The base has been narrowed to allow for body mounts that are in most lexan body shells.
    88mm wide at the front and piped to run wires for lighting. Front section is deep enough for a servo to run a wench or a 9 volt battery for lights. 56mm at the back of the base narrowed to clear body mounts. Length of base is 143mm. Top of boom is 173mm. Unit will need to be shifted forward or back to allow for overhang and allow for use of included sling unit. May require removal of rear bumper on the proposed model install.
    Pictures are part of the description - Study images carefully as there is no guarantee this insert will work for your application. Expect to have to modify this item to make it work. May have to saw off the back of base or drill out the sides to fit between mounts. Cut holes to run wires. Unit has 2 holes in base front and back to allow to bolt to lexan, no hardware included. Wrecker unit is for display only and is not guaranteed to lift or tow any other vehicle.  The Wrecker unit is plastic and may break. Glue and Paint is your tools to make this work.
    You get:   1 - 3d printed Wrecker Insert, 1 - 3d printed adjustable sling unit in black
    7" action figure and clear 1/10 lexan body shown for size comparison and is
    NOT
    included.
    If you have any questions or concerns please contact me via Ebay Messaging. Thanks for Looking! Happy Ebaying!
    Click here to check out more items at
    www.hobbyburger.com