-40%
OS 46 FX-H Hyper 50 OS SX50 OS SF46 OS 50FSR RC Engine BEARINGS Premium HiSpeed
$ 3.99
- Description
- Size Guide
Description
Visit My eBay Store: RC Engine BearingsThanks for choosing RC Engine Bearings (cbr10006zu2)
PLEASE CHECK FITMENT GUIDE BELOW
We only sell Quality Premium Grade ABEC3 or better upgrade Hi Speed Bearings
and for only a couple dollars more than the common unknown spec
or abec1 rated low grade soft metals general use Bearings,
our Premium Bearings are all correct C3 Clearance
for heat in Model Nitro/Gas Engines, we only sell True Sealed Bearings,
Not the old leaky shield type.
We get our Bearings from proven reliable US Bearing Suppliers.
We supply Clubs and engine Rebuilders.
I'm VeriSign and PayPal Verified . I've been on Ebay 20 + Money Back Guarantee.
We have the 5 STAR Rating on Seller.com and EBAY Top Rated Plus
(INFO) ALL INTERNATIONAL SHIPPING, we still pay the extra Ebay Shipping Fee
we get charged plus Bubble Mailers, Packing Supplies, Print Ink & Paper and Misc.
Plus our Insurance, so please bear with us we don't like the high cost of International
Shipping any more than you, we do our best and have no other options
except at much higher price shipping options.
(Note) Int. Shipping can take 2 to 5 weeks due to multiple carriers sorting and Customs delays.
((NOTE INTERNATIONAL SHIPPING))), some Countries have Customs Fees that they can charge you when your order arrives,
we don't know if or what they charge so check with your Postal Customs Service before buying if you don't know to avoid surprises.
(Included Printed BEARING Installation guide, Tips and 4 Stroke Timing instructions)
I've rebuilt over 800 Model Engines if you need Help just email me.
Fitment guide for these Bearings
.OS Hyper 50 Heli OS 50SX-H OS 55HZ OS FX-H 46 OS 46AX OS46AXII
OS 40FX OS FXI 46 46FX OS 40SF OS 46SF OS 40FSR OS45FSR FSR50 OS 50SX OS 55AX
.The listing is for (2) NEW PREMIUM Up Grade ABEC3/C3 BEARINGS, not returns, no refurbished or seconds.
You are buying (1) SET (2) Premium BEARINGS with installation Tips Instructions.*
(REAR) 6902 Hi SPEED ABEC3/C3 PREMIUM HC
Deep Groove Bearings – EMQ Quality
Hi Carbon STEEL HCH EMQ
ISO Certificates
ISO 9001:2000
ISO 4001:2004
ISO/TS 16949 Germany
Dimensions
28 X 15 X 7 MM
BEARING GRADE
ABEC 3 Premium Grade
Internal Clearance Codes C3
EMQ Quality
RPM Limit
Grease 27000 rpm *Sealed Pre-Loaded with Wide temperature range Chevron SI-2 (-20 to + 250)
Oil 31000 rpm (OPEN)
Vibration Level V2+
(FRONT) USBB R6 2-RS ABEC3/C3 Premium Blue Seal (Sealed)
Matched ABMA Grade 10 or better for roundness
Raceways EMQ Quality Mobil Grease
Finely honed Super Finished for long life and low noise
Quality Level Premium EMQ
Dimensions
Bore-3/8 OD-7/8 Width-.281
USBB Blue SEALS to demonstrate to people
these are our Premium Bearings (not just
a no grade or Low grade ABEC 1 bearing and someone says they are
Premium bearings). Pay a little more to get a better product.
Mobile EM2 grease and have Blue double lip seals
1 SEAL on each side of the Bearing.
Thanks again to all our regular and new Customers for our 5 Star Seller Rating.
Engine BEARING Care and storage info.
Why pay or 40 dollars for low grade or no grade factory bulk bearings that don't last long
compared to Premium Industrial Grade ABEC3/C3 High Speed Bearings,
get some spares if you leave fuel in your engine they will need replaced
after they gum up or turn into a ball of rust, you can save buying a new engine
by replacing gummy or rusted, stuck, rough or loose bearings
before they come apart and damage the piston, head and sleeve.
Save $$$ New Premium ABEC3/C3 Bearings make a big difference in engine performance.
I always remove the fuel line and idle the engine dry, then put in marvel mystery oil
or after run oil and spin it over, for long tern add liberal amounts of
After Run Oil and cap off carb and exhaust, if the engine sets for a long time
Not properly oiled it may appear to turn smoothly but some of the time the bearings aren't even turning,
then when started the crank spins in the inner bearing race, not good.