LECTORA PROXPRO HID

Description

Specifications
Typical maximum* read range:
ProxCard® II card - up to 8” (20 cm)
ISOProx® II card - up to 7” (17.5 cm)
DuoProx® II card - up to 7” (17.5 cm)
Smart ISOProx® II card - up to 7” (17.5 cm)
Smart DuoProx® II card – up to 7” (17.5 cm)
HID Proximity & MIFARE® card – up to 7” (17.5 cm)
ProxCard® Plus card - up to 3” (7.5 cm)
ProxKey® II keyfob - up to 3” (7.5 cm)
MicroProx® Tag – up to 4” (10.2 cm)
ProxPass® Active Vehicle Tag – N/A
*Depending on local installation conditions.
Dimensions: 5.0” x 5.0” x 1.0” (12.7 x 12.7 x 2.54 cm)
Material: Polycarbonate UL 94
Power supply: 10-28.5 VDC; Linear power supplies
recommended. Reverse voltage protection included.
Current requirements: Average: 100 mA (12 VDC)
Peak: 120 mA (24 VDC)
Operating temperature: -22° to 150° F (-30° to 65° C)
Operating humidity: 0-95% relative humidity
non-condensing
Weight: 12 oz. (336 gm)
Transmit frequency: 125 kHz
Excite frequency: 125 kHz
Cable distance:
Wiegand or Clock and Data interface: 500 feet (152 m)
RS-232 interface: 50 feet (15 m)
RS-422 interface: 4000 feet (1219 m)
Recommended cable is ALPHA 1295 (22 AWG) 5
conductor stranded with overall shield or equivalent.
Additional conductors may be required for LED or beeper
control. RS-422 requires ALPHA 6212C 2-Twisted Pair,
shielded cable with drain wire, or equivalent for data,
plus ALPHA 1292C two-conductor shielded or equivalent
for DC power.
Certifications:
Canada/UL 294 Listed: Access Control System Units
FCC Certification, United States
Canada Certification
CE Mark, Fifteen EU Countries under the R&TTE
Directive (EN60950 - ITE Electrical Safety, EN 300 330
- SRD, and ETS 300 683 - EMC)
IEC60950, ITE CB Scheme Electrical Safety
Australia C-Tick Mark, New Zealand EMC, China
Taiwan (5355 only)
LIT5355DS 10/05