-40%
FX Impact Mk3/M3 500,600,700&800mm Barrel Tensioned Carbon Fiber Sleeve.

FX Impact Mk3/M3 500,600,700&800mm Barrel Tensioned Carbon Fiber Sleeve.

$ 10.56

Availability: 100 in stock
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Brand: FX
  • MPN: Does Not Apply

    Description

    FX Impact Tensioned Carbon Fiber Sleeve used in between stock shroud and action, barrel has to be mounted the barrel mounting screw has to be tight because your pulling/adding tension to the whole barrel system if you tighten the shroud really tight the barrel screw my slip so don’t over tighten.
    1. remove shroud
    2. slide CF sleeve with tapered end against the action
    3. then you tighten the shroud till the required tension to make barrel X5 stiffer.
    CF Sleeve has been turned on a lathe to make sure it’s square on both end and one end with a taper goes on the action side this will ensure when pulling tension is applied the barrel is true.
    Your buying one sleeve so Please indicate barrel length !!!!!!