4250 800KV Brushless Motor - Monster Plane Motor - Glider RC Airplane Heli

Description

Here is the Monster Plane Brushless Motor I use for Many of my scaled up builds, from 180-225% of the scratch build DTFB planes.  Offers plenty of power and torque.  I use up to 15 inch prop without any problem.  Make sure you do your power tests.  The motor has  3.5mm Banana Plugs Pre-Soldered and is shipping local from the USA.  Also servicing and shipping to Canada and Puerto Rico.
Will Ship in a box, inside a Poly Bubble Bag.
Pair this Motor with a 60 AMP ESC or 80 AMP ESC, Available in my other listings.
Thank you for Looking and If you purchase thank you for supporting a small family business.
As Always, I bench test each product before shipping, to ensure that you receive quality functioning and reliable parts.
4250 motor parameters:
Motor diameter: 42mm
Motor height: 48mm
Shaft diameter: 5mm
Output shaft length: 20mm
KV value: 800KV
Maximum power
:
1250W
Voltage: 11.1-36V
Resistance: 0.068?
No-load current: 1.5-1.6 A (maximum current 80A)
Banana connector: 3.5/4.0mm
Lithium battery section number: 3-7S
Mounting hole size: M3*4
Weight: 208g
I would recommend keeping the prop under 12 inches with a 60 amp esc, over 12" 3 bladed or 4, I would recommend the 80 amp ESC (no more than 13 inch prop).   Always Power test your set up.
I've used this Motor on my 7ft F4U Corsair, 7ft Spitfire, 183% Monster Goblin and 225% Monster Alpha and 185% Monster Cub,  This is a motor with a very wide range of performance.  Always power test your Motor and ESC combinations to stay within safe operational and structural limits of your plane.  Remember when scaling up, you need to add reinforcements to certain key areas, Motor box, wing under carriage, fusalage, elevator and tail section.
Happy Building and SEE YOU IN THE AIR!!!